Printable View
In the base editor, I think adding an option to "select all buildings" would be helpful. What I mean by this is that for all buildings currently on the map/field, you can select everything and slide your design over by as many squares as needed. We all have been at the point where we just need one extra row on the bottom of the base.. Selecting all would allow you to shift ALL BUILDINGS AND WALLS at the same time instead of having to start over or move everything one by one.
What do you think?
I agree. Or you should be able to select certain buildings by tapping on them and they would all be selected. Like a little GUI box in the village edit mode.
I don't know how that would be useful durin edit mode though.... Maybe if you have four buildings of the same type side by side...Quote:
Originally Posted by MrHawkey
This happens to me a lot because I keep my Halloween headstones and Xmas trees and some of them are like 5 squares from the edge and when I am trying to build a new symmetrical base and I realise that they are in the way I have to move everything over a couple of spaces and sometimes I mess it up and it's really annoying so this would be a great idea
Good idea. Set up a petition or a poll.
Pretty decent idea, it's simple, to the point, and doesn't require tons of coding to add.
It would definitely help me when my buildings aren't in line with the grass on the outside!
Can't say how many times I have wanted this. Would be a fantastic addition.
Nice idea.
Thanks for the feedback. Keep it going so hopefully SC will see it. Im new to the forums, is there a better way to grab their attention?
Use the search function before making a thread, common idea.
Lol, THX for the feedback.Quote:
Originally Posted by Ninja352
Daily bump
Bump again ;)
hahahah thanks manQuote:
Originally Posted by Postal
Two thumbs up. Add a poll.
i may just do that. I have to play around in the forums a little bit first and figure it out.Quote:
Originally Posted by TADP0LE
I usually use my cc to make sure my base is centred before I start building. It's huge trigger radius makes it an easy way to check. You could also count the tiles...
Yes ! Will definitely help. :thumbsup:
Yup I was just saying this while making my base design today.
goood idea, my village isn't centered, no matter how much I try, because If I fail I have to repeat all over again
Quote:
Originally Posted by mrkw
You can do that if you want your base centered in the field, or if youre base is designed to have the CC centered. But if you are in a clan that doesnt have high donations, it doesnt always make sense to have the CC centered. Plus, some of my favorite base designs that withstood the most attacks were not centered on the playing field.
Several of you said I should add a poll. Well I have added it. Thanks for your support of the idea.
Very good idea
This would actually help out quite a bit. No running out of space in the edit mode any more. :thumbsup:
I hate having my base be center, so this is a great solution.Quote:
Originally Posted by Bluerage05
Thanks for voting so far. We need a lot more to respond before SC sees this. Please comment/bump/ vote to see if it gains traction.
Good idea. Really helpfull especially for th10, when u have such a mass of buildings.
oh yea, heck it would be very helpful at TH9 even! or 8..Quote:
Originally Posted by Quake
Maybe it will be easier with a ruler?Quote:
Originally Posted by mrkw
Bump again
i see no reason why this would not be a welcome addition
You should be able to lock ur clan castle just like you can your king and queen. It would protect you from losing a troop that you might be about to use for war.
:confused::confused::facepalm:Quote:
Originally Posted by jonwhsjes
Make your own thread dude
Wait no don't
Please use the search function
Quote:
Originally Posted by jonwhsjes
plus that idea was ruled out by SC.Quote:
Originally Posted by TheOneTheyCallSmasher
This would be good. An improvement would be if you could select a number of items doing something like ctrl/click or an entire range (that can include all) it would help a lot with base building. Especially for the guys with bigger bases that are filling the entire area. They can get pretty far before finding their entire plan is being blown up for want of a single tick to the left.
my point exactly man!Quote:
Originally Posted by rwelshjr
Daily bump :)
Hey everybody,
I redesigned my TH9 base again and i realized how useful of an idea this is. Not just for centering, but for making small tweaks if your base is cornered on the map.
why this is not included yet? :-) bump
Agree. Just like the OP said, this isnt really game changing but would be a nice addition. I had a base once that wasnt centered for some reason and when i noticed it, i was already about 80% finished and since i had to move each piece one at a time(except walls ofcourse), i ended up just letting that setup as it is.
Again, not critically needed, but would be nice.
bump bump bump
bumping back up. I put down Clash for a while, with the update this week I have jumped back in... for a bit at least. Lots of support here! Thanks!
Just ran into this issue again while building a new war base :-/
This is like exactly what I need for when I'm farming and I want to shift my base down farther away from the townhall, this needs to get added:thumbsup:
There are a lot of people that want this. I think it's a no-brainer to add into the game. I'm not a programmer, nor do I write code... But this can't be that hard! :)Quote:
Originally Posted by ZachTyler
If you haven't already, vote in the poll!
but it should have a remove buildings buttun when you select all the buildings
what do you mean? There is already a "remove all" function in the editor...Quote:
Originally Posted by Andreh
Due to the popularity of ideas in relation to this all around the Forums, there is no doubt SC is currently working on this. Don't worry.
Damn dude, you do not know how many times my base is unsymmetrical and I've wished for this!!!
This idea has been posted a lot of times before....but yes, I do agree and think that this idea should work.
i really hope so!Quote:
Originally Posted by jaronhudson15
happened to a clan-mate of mine this weekend lol
I agree that this should be added, but it should only be an option while in the Layout Editor screen, where ALL layout edits should have to be made. The main screen should be locked down to prevent accidental edits.
yes i agree... this should only be available in edit mode.Quote:
Originally Posted by Megalomania
Looks like they are expanding the field to either 44x44 or 45x45 with the TH11 update. This would be an excellent time to add in this feature!
random bump - Vote in the poll if you havent :)
Please stop, you've bumped your thread 4 times already.
If your thread is being ignored, that doesn't mean you should bump it loads of times. The last time someone other than you posted was 3 months ago. It's time to think of a new idea, not be silly and bump 4 times in a row.
Hey Scavenger. Thanks for your very heart felt concern sir. I just randomly "bumped" the thread earlier, yes that is true. i also drew attention to the poll. Last week I commented because It was relevant. and prior to that it was almost always a reply.... much like this reply here.Quote:
Originally Posted by TheScavenger350
it would be silly if I were bumping it multiple times in a day or the same week.. but I may bump it once a month IF that. That is because I think this is feature very much needed. I am not breaking any forum rules man, at least not that I know of. I appreciate your desire to keep the forums clean though.
Have a nice day!
yesss:thumbsup::thumbsup::thumbsup: :D
Yes I'd love this.. Always wish this was implemented. I'm all for it!
Thanks for the support man!Quote:
Originally Posted by notchiefsteve
Sorry i missed this reply.. but i agree with the thumbs up obviously. haha!Quote:
Originally Posted by BONEZ98
I just read in the do not request list, this idea....
it wasn't there when I started this thread, I read those actually. Fact still remains that it is a desired feature.Quote:
Originally Posted by Blackdjinn
What kind of miserable person would vote no to this haha. Solid idea.
Quote:
Originally Posted by Butthax
I have often wondered the same thing! haha.. must have been a troll. That is the only excuse.
Kudos to the original post. I was just doing some base design in preparation for the new update and was REALLY wishing the map editor had a multi-select move capability.
Yes, this idea is very good. I do not see why it should not be implemented.
Have always supported this.... No downside to doing so....
LOL at the poll...
love the idea dude. Have been thinking about it my self and would really like to see supercell implement that into the game. Sure would be helpful after the new update.
Yes. I always end up making a mistake when building and wan to move my entire base one tile over. rotation and flipping would be helpful too.
very good idea indeed..
moving all buildings at once will be helpful in upcoming 44x44 expansion update
also it will be good if there is optn for group move. like we can move selected group of building only instead of all of the base....
Yes i need this very much.
Do you guys actually think SC will ever implement this?
awesome voting guys-- last i checked it was only at 110 votes.
always that one troll.. smh.
Yeaaasssss!!!!!!!!!!!!!!!! We are getting this feature!! Finally! Boooommmmmm...