Mortar 1 hit wb should be stop

i know its frustrating but timing is everything...so wallbreakers should not be invisible. if this happens to me, i let giants break thge first layer of wall themselves and then leave wallbrekers so they can blast the walls inside..it slows down the mortar to change its area so this works 90% of times

Quote:

---

Originally Posted by dahimi

Smart people drop giants or even barbs first, let them grab the mortar's attention (along with other defenses), then drop wall breakers where they will attack away from the troops that are causing focused fire.

Others drop healing spells while ignoring the fact that lots of defenses will one shot a wb then they complain on the forums.

---

My gosh, it's like you're not even reading my posts. I have several giants, barbs, and archers in the outer (or inner) ring. The mortars ARE targeting them (edit: the meatshields, not the WB's). The problem is, the mortar has a pretty large kill zone, and my WB's either have to run through it, or stop inside it. Stopping inside it is somewhat my fault, but sometimes I don't have control over that when I'm trying to bust into the core. But sometimes, it's just a simple matter of trying to run through the kill zone. With mortars shells dropping every 1-2 seconds, sometimes my WB's can't seem to find a window.

Yes, I'm using meat shields. No, the defenses are NOT targeting my WB's. Yes, my WB's are still getting one-shotted by mortars. It's rare, but it happens.

I'm not asking for invisible troops. I wasn't even the one who opened the discussion. But as long as we're on it, I do see a case to be made to up the health a tiny bit, so that someone a TH below you, or at your TH with a sub-max mortar, isn't one-shotting your maxed WB's.

Will I beg SEE for it? No. Do I think that people should stop making ridiculous claims about how stupid someone must be to run into this problem? Yes.

Quote:

---

Originally Posted by Xitra

My gosh, it's like you're not even reading my posts. I have several giants, barbs, and archers in the outer (or inner) ring. The mortars ARE targeting them (edit: the meatshields, not the WB's). The problem is, the mortar has a pretty large kill zone, and my WB's either have to run through it, or stop inside it. Stopping inside it is somewhat my fault, but sometimes I don't have control over that when I'm trying to bust into the core. But sometimes, it's just a simple matter of trying to run through the kill zone. With mortars shells dropping every 1-2 seconds, sometimes my WB's can't seem to find a window.

Yes, I'm using meat shields. No, the defenses are NOT targeting my WB's. Yes, my WB's are still getting one-shotted by mortars. It's rare, but it happens.

I'm not asking for invisible troops. I wasn't even the one who opened the discussion. But as long as we're on it, I do see a case to be made to up the health a tiny bit, so that someone a TH below you, or at your TH with a sub-max mortar, isn't one-shotting your maxed WB's.

Will I beg SEE for it? No. Do I think that people should stop making ridiculous claims about how stupid someone must be to run into this problem? Yes.

---

Yeah as th9 attacking th8 planning to level a village but wb get kil make troops go around base feel bad
aq as wall destroyer pretty much good outside range of everything but too long sometimes attacking useless wall

Quote:

---

Originally Posted by AlvinSoehendryWijaya

Wb is the most expensive unit per housing space
they should be invisible until they explode

---

I smell a troll idea.

If you can't time your wallbreakers to blow up a wall without being hit by a mortar, there is a problem. Bring more than 1 wallbreaker to a raid to prevent this from happening..

Quote:

---

Originally Posted by Xitra

My gosh, it's like you're not even reading my posts. I have several giants, barbs, and archers in the outer (or inner) ring. The mortars ARE targeting them (edit: the meatshields, not the WB's). The problem is, the mortar has a pretty large kill zone, and my WB's either have to run through it, or stop inside it. Stopping inside it is somewhat my fault, but sometimes I don't have control over that when I'm trying to bust into the core. But sometimes, it's just a simple matter of trying to run through the kill zone. With mortars shells dropping every 1-2 seconds, sometimes my WB's can't seem to find a window.

Yes, I'm using meat shields. No, the defenses are NOT targeting my WB's. Yes, my WB's are still getting one-shotted by mortars. It's rare, but it happens.

I'm not asking for invisible troops. I wasn't even the one who opened the discussion. But as long as we're on it, I do see a case to be made to up the health a tiny bit, so that someone a TH below you, or at your TH with a sub-max mortar, isn't one-shotting your maxed WB's.

Will I beg SEE for it? No. Do I think that people should stop making ridiculous claims about how stupid someone must be to run into this problem? Yes.

---

Mortars have a slow rate of fire so its your fault if they keep getting hit.
Oh I see your problem, you are hoping that your wbs are finding a window. You are the one who is supposed to time them or at least drop them in a way in which they don't go directly under the tanks.

Quote:

---

Originally Posted by Gama321

Mortars have a slow rate of fire so its your fault if they keep getting hit.
Oh I see your problem, you are hoping that your wbs are finding a window. You are the one who is supposed to time them or at least drop them in a way in which they don't go directly under the tanks.

---

4 mortar bombarding nonstop
and their ai is a problem
in 1 case i deploy 10'wb destroy first line wall and not going second line
he go just next wall