Printable View
i have always been curious, how do you guys upgrade your walls?
which do you think is better?
starting in the center and working your way out?
by protecting your most valuable building, whether its your TH or DE storage.
or do you like starting on the outside edges first?
upgrading the corners and intersecting joints.
Core of the base first , then the intersections , and then everything
For me its always been upgrading from the core to outside.
Every other one.
Core first... I will even do my core full lvl 11 before starting to up other walls to lvl 10.
I start with edges on the outside.Then i do the edges on the inside.Then i do all the other walls starting with the outer walls and finishing with the core.
Core first as it is smaller and easier to do.
But as soon as i have enough walls to do the outside i switch the out and then redo the core.
Currently staring Legos, has i only have 15 i use them as christmas decorations : on corners :) so cute
Do you leave a builder free or grind it out in the end?
Always the second layer first
I kee p one builder free except if next free builder is to be free within a day
Core of base then I work my way to outside walls.
When an upgrade is about to finish i increase my looting rate,to have what's needed for the walls.Quote:
Originally Posted by andrew1028
Can't dedicate a builder just to the walls i only have 4.
start your way in the middle work your way out
I do the outer walls first. Every attack needs to go through those.Quote:
Originally Posted by Jspin7980
This is not a good idea since this will do nothing against wall breakers.Quote:
Originally Posted by MrFunnyWobbl
I do it by compartments, surround my storages first, then core compartment, then defenses by importance ie splash first etc.