Builder Timing Bug? INFLATED

This is frustrating! If it has been going on for so long, why haven't they fixed it yet?
My level 6 wizard upgrade has an extra 5 hours now. On an upgrade that takes 2 weeks this is a real pain.
Solve this problem please!

Quote:

---

Originally Posted by Whynotnow

In the signature page (top right corner -> settings -> edit signature) you'll find two options to add a picture. Either upload one (meaning you have to download that image first) or enter a direct link. If you choose the latter, here's the direct link to the image I'm using:

http://oi41.tinypic.com/2rhsr5s.jpg

After that, in the space allotted for the signature (the big area where you can type) just enter the following: (take out the @'s, they prevent the code tags from working here)

[@sigpic][@/sigpic]

Then click save. If you want to make it so that clicking on the image will direct people to this thread, enter it like this: (again take out the @'s)

[@url=http://forum.supercell.net/showthread.php/164475-Builder-Timing-Bug-INFLATED?p=1018251&viewfull=1#post1018251][@sigpic][@/sigpic][@/url]

Good luck :)

---

Thanks a lot for this. However, when I enter [@url=http://forum.supercell.net/showthread.php/164475-Builder-Timing-Bug-INFLATED?p=1018251&viewfull=1#post1018251][@sigpic][@/sigpic][@/url] without the @'s into the big space and preview it says invalid file, or just shows a link without the embedded picture. I tried the same thing with the direct link and had no success. Am I doing something wrong?:confused: Probably a simple error that is avoiding me.

Many thanks.

I took some screenshots, hopefully makes it a bit easier. I've also edited my previous post using code tags so there's no hassle with the @'s and stuff.

On the edit signature page, first enter the url in the upload section, then click upload:

http://puu.sh/6f1Pn.png

Next, put the sigpic tags in the big space and drag your mouse over it (highlighting it in blue) and click the Link button (displayed as a little globe, the left one without the red X on it):

http://puu.sh/6f1PO.png

Then enter the url to this thread (given below) in the pop up window that appears:

http://puu.sh/6f1Qe.png

Finally, click "OK" on the link window and then "Save signature".

Link to this thread:

Code:

---

http://forum.supercell.net/showthread.php/164475-Builder-Timing-Bug-INFLATED?p=1018251&viewfull=1#post1018251

---

Good luck :)

Quote:

---

Originally Posted by Whynotnow

I took some screenshots, hopefully makes it a bit easier. I've also edited my previous post using code tags so there's no hassle with the @'s and stuff.

On the edit signature page, first enter the url in the upload section, then click upload:

http://puu.sh/6f1Pn.png

Next, put the sigpic tags in the big space and drag your mouse over it (highlighting it in blue) and click the Link button (displayed as a little globe, the left one without the red X on it):

http://puu.sh/6f1PO.png

Then enter the url to this thread (given below) in the pop up window that appears:

http://puu.sh/6f1Qe.png

Finally, click "OK" on the link window and then "Save signature".

Link to this thread:

Code:

---

http://forum.supercell.net/showthread.php/164475-Builder-Timing-Bug-INFLATED?p=1018251&viewfull=1#post1018251

---

Good luck :)

---

This is a great guide. Do you mind if I quote it to help others in the future who do not see your post in this thread?

Of course, feel free :)

Quote:

---

Originally Posted by Whynotnow

I took some screenshots, hopefully makes it a bit easier. I've also edited my previous post using code tags so there's no hassle with the @'s and stuff.

On the edit signature page, first enter the url in the upload section, then click upload:

http://puu.sh/6f1Pn.png

Next, put the sigpic tags in the big space and drag your mouse over it (highlighting it in blue) and click the Link button (displayed as a little globe, the left one without the red X on it):

http://puu.sh/6f1PO.png

Then enter the url to this thread (given below) in the pop up window that appears:

http://puu.sh/6f1Qe.png

Finally, click "OK" on the link window and then "Save signature".

Link to this thread:

Code:

---

http://forum.supercell.net/showthread.php/164475-Builder-Timing-Bug-INFLATED?p=1018251&viewfull=1#post1018251

---

Good luck :)

---

Cheers for this!

I believe it should be working now.

Many thanks:D

There's no way SuperCell will fix this. This was probably done intentionally, but I don't blame them since they do it to earn money. :D

The worst part is that they hide it, and don't want to fix it.

So sad that a multi million dollar company can not fix such a issue....

I might get alot of hate from this but i think that the Time lag,although bad, Is less important than new updeates. I woulsd rather SC make new updates than Fix this.

Quote:

---

Originally Posted by Alweert

I might get alot of hate from this but i think that the Time lag,although bad, Is less important than new updeates. I woulsd rather SC make new updates than Fix this.

---

Don't worry, there's very little risk that SC would fix this so you get your Th11 in no time ;)