Wall breaker question.

If you want to get into the inner walls, do you have to deploy the second bunch of wall breakers within a certain time after the first bunch blows the wall?

Reasoning... I didn't have a problem getting into the inner walls before the hero update but it seems wb got dumber. (And yes, I do realize they are skeletons therefore they don't have a brain) Not saying that the update was the cause but that's around the time I noticed it. I just attacked someone (major fail) with walls as a square in a square in a square (square bullseye). I drop 2 wb, blows 1 wall. Drop 2 more on same spot, blows wall next to existing hole. Drop 2 more on same spot, blows wall on other side of the first opening. I continued this 2 more time still trying to get to the second layer and it was a fail. So far 10 wb used. I use last 5 at the same spot to test the wb. Same thing. 15 wb and not 1 went for the inner wall, just blew a hole 7 spaces wide in the first wall. Lucky for me that persons TH was outside, I got the 1 star and left.

seems to be the same for me. so long as you throw them on the same spot it should target the same line of inner walls. there is a distance limit though but it's fairly large. once the walls are too far it'll target the closest wall edges that were blown originally.

Quote:

---

Originally Posted by facescraper

seems to be the same for me. so long as you throw them on the same spot it should target the same line of inner walls. there is a distance limit though but it's fairly large, you wouldn't get to a third wall for instance. once the walls are too far it'll target the closest wall edges that were blown originally.

---

I'm pretty sure I could get to the third wall before. Just as long as there was a 3x3 item between each layer of walls and I was deploying them in the same spot. Farther distances between the inner walls didn't work so well as you stated above. I was thinking they had a 5-10 second memory of the path the previous wb took.

I seem to have been having success tunneling using burst or 2 or 3 wall breakers. I release them before the first wall breakers even reach the outer wall. I'm not sure why this works but I've tunneled through 3 layers of walls using this technique.

just did a 3 wall blast in the game now, so the other time must have been further out than the normal two spaces.

still works fine for me..

even a gap of 2 walls was enough for me to tunnel my wb.

Join xbox i have a fire red sign and i donate wizards and lower so just plz join me

Quote:

---

Originally Posted by Junliang

still works fine for me..join xbox

even a gap of 2 walls was enough for me to tunnel my wb.

---

join xbox u hav etoo

Quote:

---

Originally Posted by Zeeeeman79

Lucky for me that persons TH was outside, I got the 1 star and left.

---

I already tried to explain why this happens. Read here and pay attention to my posts. http://forum.supercell.net/showthrea...the-A-I-of-WBs

Good luck

Quote:

---

Originally Posted by Junliang

still works fine for me..join xbox

even a gap of 2 walls was enough for me to tunnel my wb.

---

join xbox u hav etoo

Thanks for the feedback. I should of mentioned that it doesn't happen all the time. Although, when it does, it's frustrating. Thanks again.

Pretty sure it's just you misclicking. I did a raid on an egg base (square base you're talking about) and the WBs acted just fine. There were 4 walls and they all blew up the same column. I made sure I clicked the same spot.

Quote:

---

Originally Posted by xbox

join xbox u hav etoo

---

:rolleyes::rolleyes::rolleyes:

http://i0.kym-cdn.com/entries/icons/...23/untitle.JPG

And post such post at recruitment section.